Cleaning - Denso UR21-MR-01 User Manual

Improper handling of the scanner may cause heat generation/fuming,device failure.
Keep the following precautions in mind when using:
 When disconnecting the AC adapter from the wall socket, hold the AC adapter body not the
power cable.
The power cable may be broken, resulting in a burnt AC adapter, electrical shock, or fire.
 If the interface cable is damaged (e.g., exposed or broken lead wires), stop using it and
contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
 During electrical storm activity, always unplug the AC adapter from the wall socket.
Exposure to power surges could result in a damaged scanner or fire.
 When taking care of the scanner, unplug the AC adapter from the wall socket for safety.
Failure to do so could result in an electrical shock.
 Do not drop the scanner.
The scanner housing may be broken, creating injuries.
Using the scanner whose housing is broken could result in smoke or fire.
Unplug the AC adapter from the wall socket and contact your nearest dealer.

Cleaning

 Cleaning the scanner
Clean the scanner with a soft, dry cloth.
CAUTION
(1) Do NOT use any cleaning agent such as naphtha or alcohol. The housing may be degraded or the sticker or coating could peel
off.
(2) If it is noticeably dusty or dirty, wipe it using a clean cloth soaked with water-diluted detergent (it should be slightly wet) and
then wipe it with another dry cloth.
CAUTION
vi