Chapter 1 System Configuration
This chapter describes the hardware required for the UHF RFID data collection system and the software for the RFID table
scanner.
1.1 System Configuration
To use the UHF RFID data collection system using the RFID table scanner, the following hardware and software, as well as
the the RFID table scanner, are required: Using the DLL supplied by us, application programs can easily be built in the
computer in a general-purpose development environment (Visual Studio, etc.).
Some of the hardware requirements differ according to the communication system used.
Computer (optionally available)
CAUTION
(1) Computer and interface cable are not included in this package; they are available from suppliers.
(2) Two antennas can be connected to the controller.
RS-232C/USB interface cable (optionally available)
AC adapter *
Coaxial cable
Controller
- 1 -
Antenna
Coaxial cable *
Antenna *
* option