Denso UR22-MR-01 Instruction Manual

UR20 Series specifi cations
(RS-232C/USB model)
Model
UR21-MR-01* 1
Readable and writable RF tag ISO/IEC18000-63 TypeC (EPCglobal Class1 Gen2) -supported Tag
Frequency 865.7–867.5 MHz
Channel width/number of channels 600 kHz/4 ch
Transmission output 500 mW ERP
RFID
Modulation method PR-ASK
Transmission rate 40 kbps
Scanning distance* 2 0–800 mm (Avery Dennison AD-229r6)
Output adjustment 5–23 dBm
PW: power supply (green), COM (red), ANT1 (orange),
LED indication function
ANT2 (orange) 4 total
RS-232C (D-SUB 9P),
Interface
USB (mini USB B Type)
Power supply AC adapter (100 V)
Power
Current consumption 1300 mA MAX (excluding inrush current)
Operating temperature 0–40°C
Controller: 90 × 108.5 × 31 mm
Dimensions
Antenna: 200 × 200 × 17.5 mm
Structure
Controller: Approx.130 g
Weight
Antenna: Approx.360 g
Controller 1 (including a rear cover and screws for securing the rear cover)
Antenna 1 (with VESA-compliant screw holes)
Components
Antenna cable Double-end RF connector (GT27) cable (2000 mm long)
Antenna securing screws
*1: Do not connect an antenna, a controller or a cable that is not specifi ed by Denso Wave.
*2: Network range may vary according to target tag. Network range is a reference value and this may vary accordingly, depending on the actual
environmental conditions.
The set includes
[UR21-MR-01] [UR22-MR-01]
G Controller (URCT-M22)
G Controller (URCT-M21)
G Antenna (URAN-R2) G Antenna (URAN-R3C)
G Antenna cable (between antenna and controller) G Antenna cable (between antenna and controller)
G Rear cover (lock nuts included in package) G Rear cover (lock nuts included in package)
G Safety Precautions G Safety Precautions
G Screws for securing the antenna G Screws for securing the antenna
System confi guration
UR21 blue
Items that are included in the set are indicated in .
G Instruction manual
RS-232C cable (D-sub9 pin)
PC POS register USB (mini USB B Type)
* This cable is not included.
Antenna cable 
Antenna cable 
AC adapter Controller
(AD2-1005/3000) (URCT-M21) Antenna  Antenna 
(URAN-R2) (URAN-R2)
* Antenna  and Antenna cable  are not included.
UR22
Items that are included in the set are indicated in blue .
G Instruction manual
USB cable (mini USB B Type)
PC Ethernet cable
* This cable is not included.
Antenna
cable 
Antenna cable 
AC adapter Controller
(AD2-1005/3000) (URCT-M22)
Antenna 
(URAN-R3C)
* Antenna  and Antenna cable  are
not included.
Antenna 
(URAN-R3C)
UR20
RFID table scanner
®
Dimensions
(Ethernet/USB model)
UR22-MR-01* 1
G Antenna
200 17.5
0–2500 mm (Avery Dennison AD-229r6)
200
LAN (RJ45),
USB (mini USB B Type)
-5–50°C
G Controller
Controller: Approx.130 g 90 31
Antenna: Approx.400 g
4 108.5
* For dimensions of the antenna fi xture (B-URANR1-01), please visit our website.
Options (Sold separately)
G Antenna fi xture
(B-URANR1-01)
G Antenna (URAN-R2)* 1
G Antenna (URAN-R3C)*
2
G Antenna cable (CBAN-CGT272000/GT27-01)
G AC adapter
*1: Only for UR21
*2: Only for UR22
Software (Sold separately)
G OPOS Driver
(POS Connection/Windows Version)
G Control Command DLL File
This fi le can be downloaded for free from QB Direct on
our Website.
For more information, please visit our website
http://www.denso-wave.com/en/adcd/
●Appearance and specifi cations are subject to change without prior notice. ●Description stated in this catalogue is as of December, 2016.
DENSO WAVE INCORPORATED
SERIES
Unit: mm (for reference only)
URAN-R2/URAN-R3C
75
75
4 × M4 Ultra-thin stationary
(screw depth: 4 mm max.)
As shown in the fi gure above,
VESA-compliant screw holes are
located on the back.
scanner that can be scanner that can be
installed anywhere installed anywhere
1613A-2 2016.12
RFID table scanner
UR20
NEW
Offers good products for a long time.
Long
DENSO WAVE supplies products stably for a long time.
Life
DENSO WAVE promises to continue maintenance service for
5 years after product's sales end.
®
SERIES