Table of Contents
Advertisement
Selecting the standard display –
Via the "DISPLY" menu, you can select the standard display:
Selectable standard display Contents of standard
"FREQ"
"NAME"
"CHAN"
Entering a name –
Via the "NAME" menu, you can enter a freely selectable
name for the radiomicrophone. You can, for example, enter
the name of the performer for whom the adjustments have
been made.
The name can be displayed on the standard display and can
consist of up to six characters such as:
letters (without pronounciation marks),
numbers from 0 to 9,
special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
Press the
SET
"NAME" menu. The first segment starts flashing on the
display.
With the
By briefly pressing a button, the display jumps either
forwards or backwards to the next character. If you hold
down a button, the display starts cycling continuously.
Press the
SET
select the next character.
Have you entered the name completely? Press the
button to store your setting and to return to the top
menu level.
Loading the factory-preset default
settings –
Via the "RESET" m enu, you can load the factory-preset default
settings. Only the selected setting for the pilot tone rem ains
unchanged. After the reset, the radiom icrophone is restarted
and the standard display is shown on the display panel.
22
NAME
button to get into the setting mode of the
/
buttons you can now select a character.
button to change to the next segment and
RESET
DISLPY
display
SET
Advertisement
Table of Contents
