Deactivating The Lock Mode Temporarily; Deactivating The Rf Signal; Selecting A Standard Display - Sennheiser SKM 100 G3 Manual

Table of Contents

Advertisement

SKM_100_PRT.book Seite 12 Mittwoch, 4. Februar 2009 4:59 16
Using the radio microphone

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
Lock" menu item (see page 17). If the lock mode is activated, you have to
temporarily deactivate it In order to be able to operate the radio micro-
phone:
Move the multi-function switch upwards/downwards.
"Unlock?" appears on the display panel.
Press the multi-function switch.
The lock mode is temporarily deactivated:
How you are using the radio microphone determines how
long the lock mode remains deactivated:
When you are in the operating menu
The lock mode is deactivated as long as you are in the
operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after
10 seconds.
Prior to this, the lock mode icon
flashes, indicating that the lock mode is
being activated.
543.200
MHz
ew100 G3
P
MUTE
AF

Deactivating the RF signal

Deactivating the RF signal on switch-on
For information on deactivating the RF signal on switch-on, refer to the
chapter "Switching the radio microphone on/off" on page 11.
Deactivating the RF signal during operation
When one of the standard displays is shown on the
ON/OFF
display panel, briefly press the
"RX Mute
On?" appears on the display panel.
Proceed as described on page 11.

Selecting a standard display

Move the multi-function switch to select a standard display:
Contents of the display
543.200
MHz
ew100 G3
P
MUTE
AF
B.Ch: 20.12
543.200
MHz
P
MUTE
AF
ew100 G3
B.Ch: 20.12
P
MUTE
AF
12
"Auto
ON/OFF
button.
Selectable standard display
"Frequency/Name"
"Channel/Frequency"
"Channel/Name"

Advertisement

Table of Contents
loading

Table of Contents