Setting Time And Date; Network - Sagem MyX-8 Handbook

251932287_myX-8a_lu_en.book Page 21 Mardi, 1. février 2005 1:15 13
Activating your phone

Setting time and date

When you use your phone for the first time, you need to set the date and time.
In due course, when the battery is completely discharged, or if it has been
removed, you will be prompted systematically to confirm date and time.
Setting the date:
Set the date by entering it directly in numerical form or by using the navigation
stick to increase or decrease the default values.
Use the navigation stick to access the next (or last) data input field.
Once the date is correct, press the
Setting the time: Same procedure as for setting the date.

Network

From now on the phone hunts for a network on which it can make calls. If it
finds one, it displays the name of the network on the screen. You are then
ready to send or receive a call.
If the network icon appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on the network of a different operator.
If the letter E is displayed without any network name, only the emergency services are accessible
(ambulance, police, fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The
signal strength indicator received allows you to display the quality of reception. If it indicates less than
three bars, search for better reception in order to call in good conditions.
key to validate.
21