Placing Calls On Hold; Multi-Conferencing (*) - Sagem PW 302X Manual

7.10 Placing calls on hold

(Service depending on the operator)
During a call, you can put the
current call on hold by pressing Ok.
During a call, when pressing the @
key, the key changes function and
enables you to access different
options for the call.

7.11 Multi-conferencing (*)

(Service depending on the operator
and depending on model)
A multi-conference is limited to 6
participants: 5 in a multi-conference
and one additional call
During a call, when pressing the @
key, the key changes function and gives
access to different possibilities of actions
with this call.
7. Call related features
38
Standard commands
Sequences of standard keys also permit access
to services such as call notification, call holding,
multi-conferencing, and open up additional
Warning
possibilities:
In this case,
0
pressing ends
all calls.
1
Multi-conferencing
enables you to talk
to several callers
(depending on the
network capacity
1 X
and on the model).
2
Reject a call holding or waiting (or
multi-conference calls).
End the current call holding or
waiting (or the multi-conference
calls if there are any) and accept
the call (or multi-conference calls).
End the current call order number
X.
Place on hold the current call (or
multi-conference calls) and accept
the call holding or waiting (or multi-
conference calls).