Sennheiser e 914 Instructions For Use Manual page 8

Specifications
Transducer principle
Frequency response
Pick-up pattern
Phantom powering
Sensitivity
(free field, no load at 1 kHz) 7 mV/Pa;
Equivalent noise level
A-weighted (DIN IEC 651)
CCIR-weighted (CCIR 468-3) 30 dB
Pre-attenuation
Bass filter
Max. sound pressure level
at 1 kHz
Nominal impedance
Min. terminating impedance 1 kΩ
Connector
Dimensions
Weight
pre-polarised
condenser microphone
20–20,000 Hz
cardioid
48 V/2.2 mA
2.3 mV/Pa / 0.7 mV/Pa
(with pre-attenuation)
19 dB
0, -10, -20 dB
linear
roll-off 130 Hz, 6 dB/oct.
cut-off 85 Hz, 18 dB/oct.
137/147/157 dB SPL
(depending on
pre-attenuation)
100 Ω
XLR-3
Ø 24 mm,
length: 157 mm
198 g
(without clamp and cable)
17