Sennheiser E 912 S Technical Data

Mikrofone | evolution
General Description
The e 912 S is a high-quality, pre-polarized condenser microphone with
half-cardioid pick-up pattern, acoustically optimized for picking up speech.
Due to its unobtrusive, flat design, it is ideally suited for use on conference
tables, altars and lecterns. The e 912 S can be switched on and off via an
integrated membrane switch.
Features
Programmable membrane switch
Very unobtrusive due to flat design
Extremely rugged sound inlet basket
Rubber damping plate on base
Mounting slots for mounting the microphone to table tops, lecterns, etc.
Gold-plated XLR connector
Integrated electronics (instead of in-line preamp)
An internal DIP switch bank provides the following features: on/off
(factory preset), push-to-talk button (PTT), cough button (PTM) or
permanently switched on (ON)
The frequency response curve can be changed via a second DIP switch
bank: low cut, low and high boost (factory preset), low boost or linear
(see e 912).
The e 912 S has been optimized for picking up speech at relatively short
distances, while the sister model e 916 has been designed for instrument
pick up. For this reason, the frequency response curve of the e 912 S
differs from that of the e 912.
With the e 912 S, you can obtain the frequency response curve of the
e 912 by setting the DIP switch to the position lin (linear).
Delivery Includes: Microphone e 912 S
Pouch
User guide
Variants
e 912 S BK, black
e 912 S NX, Nextel grey
Technical Data
Transducer principle .....................................................pre-polarised
Frequency response .................................................20 – 20 000 Hz
Transducer principle ............................................pressure gradient,
Pick-up pattern ..............................................................half-cardioid
Sensitivity in free field,
no load (1kHz) .............................................................6 (10) mV/Pa
Maximum sound pressure level (passiv) ............................ 134 dB
Dimensions ................................................. 126.5 x 105 x 26.5 mm
Weight .....................................................................550 g (19.40 oz)
1000 Hz
-20
-30
-40
-50
-60
-70
50
black low und high boost (preset)
red low cut (+ preset)
green linear (e 912)
blue low boost
Cat. No. 500875
Cat. No. 502193
Cat. No. 500876
condenser microphone
permanently polarized condenser
Depending on adjusted
frequency response curve
(4.98" x 4.13" x 1.04")
0˚
0
30˚
30˚
5
10
60˚
15
20
25
90˚
dB
120˚
150˚
150˚
180˚
125 Hz 2000 Hz
250 Hz 4000 Hz
500 Hz 8000 Hz
16000 Hz
100 200 500 1k 2k
Hz
60˚
90˚
120˚
5k 10k 20k
e 912 S