Changing The Operating Mode - Sennheiser Set 830-TV Instruction Manual

Changing the operating mode

The transmitter can be set to a different operating mode. This is useful
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
0
9
green:
6
Particularities of operating mode 2:
In operating mode 2, the transmitter is
signal from the sound source.
To switch the transmitter on:
Take the receiver out of the charging compartment.
To switch the transmitter off:
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
3
Press the "speech intelligibility" button
for approx. 5 seconds.
The indicator
cator for the spare rechargeable battery
flashes several times:
red: operating mode 2
operating mode 1 (factory-preset)
If the operating mode was changed success-
fully, the charging indicator for the spare
rechargeable battery
0
indicator
Pull the battery out of the receiver's battery
compartment
Slide the battery into the transmitter's
charging compartment
5
Additional technical information
0
goes off. The charging indi-
6
goes off and the
lights up again.
not switched on by the sound
3
.
5
as far as it will go.
9
6
25