Using Your Oven; Oven Control Knobs; Indicator Lights - Jenn-Air PRO-STYLE Series Use & Care Manual

OVEN CONTROL KNOBS

To Use:
1. Select desired function on the Mode Knob.
2. Select desired temperature on the Temperature Knob.
3. To turn off the unit, the temperature knob needs to be turned to OFF.
Knob Combinations
The following table shows valid and invalid knob combinations for the temperature and mode knobs.
MODE KNOB
Bake
Convect Bake
Convect Roast
Steam Bread/Meats
Broil/Convect Broil
Self Clean
Wi-Fi
NOTE: When the unit is on, mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the
Start button to confirm mode change.

INDICATOR LIGHTS

The indicator lights illuminate and blink to show the status of the unit.
BEHAVIOR
Light Pulsing/Blinking
Mode and Temperature
Knob Indicator - Slow Blink
START Button - Invalid
Selection (Quick Blink)
KEEP
PROOF
WARM
Valid Valid
Invalid Invalid
Invalid Invalid
Invalid Invalid
Invalid Invalid
Invalid Invalid
Invalid Invalid
DESCRIPTION/EXAMPLES
Light pulsing is used on the Mode Knob, Temperature
Knob, and Start button as a way to prompt for action.
When an action is prompted to be completed, the
associated indicator light feature will blink.
Examples:
Occurrence: Prompt for action, press START
Result: START Indicator Quick Blink
Occurrence: 100ºF (38ºC) decrease in temperature
required or oven too hot for Proof
Result: Knob indicator lights will slowly blink until the
oven is at the correct proof temperature
The Mode and Temperature knob indicators will
slowly blink to indicate that the feature is in use.
If an invalid knob combination has been chosen and
the Start Button is pressed, the Start Button Indicator
Light will quickly blink and a tone will sound to
indicate that the chosen selection is invalid.
See "Knob Combinations" table for examples.

USING YOUR OVEN

TEMPERATURE KNOB
TEMP BROIL
RANGE LOW
Valid
Invalid
(225-500oF)
Valid
Invalid
(225-500oF)
Valid
Invalid
(225-500oF)
Valid
Invalid
(250-450oF)
Invalid Valid
Invalid Invalid
Invalid Invalid
EXAMPLES
There are two types of pulsing:
1. Start Button
2. Mode/Temperature Knob
When a cycle requiring preheat starts, slow
blink will begin. When preheat temperature
has been reached, the blinking will stop and
the mode/temp indicator lights will be solid.
A slow blink indicates that a feature is being
used and no further action is required i.e. unit
is preheating.
Bake on the Mode knob and Wi-Fi on the
Temperature knob.
BROIL
CLEAN
HIGH
Invalid Invalid
Invalid Invalid
Invalid Invalid
Invalid Invalid
Valid Invalid
Invalid Valid
Invalid Invalid
Quick Blink: prompting for action.
White slow blink: preheating
Amber slow blink: unit is above target
temperature.
Wi-Fi
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Valid
15