Cisco Nexus B22 Design And Deployment Manual page 25

N5548-Top(config)#
N5548-Top(config)#
N5548-Top(config-vsan-db)#
N5548-Top(config-vsan-db)#
N5548-Top(config-vsan-db)#
Note:
The VLAN and VSAN numbers do not have to be the same.
Configure the native fibre channel slot/module
N5548-Bottom(config)# slot 2
N5548-Bottom(config-slot)# port 1-16 type fc
N5548-Bottom(config-slot)# poweroff module 2
N5548-Bottom(config)# no poweroff module 2
Configure the native fibre channel slot/module
N5548-Top(config)# slot 2
N5548-Top(config-slot)# port 1-16 type fc
N5548-Top(config-slot)# poweroff module 2
N5548-Top(config)# no poweroff module 2
7. Configure the Fibre Channel interface port type:
N5548-Bottom(config)#
N5548-Bottom(config-if)#
N5548-Bottom(config-if)#
N5548-Top(config)#
N5548-Top(config-if)#
N5548-Top(config-if)#
8. Bind the VSAN to the Fibre Channel interface:
N5548-Bottom(config)#
N5548-Bottom(config-vsan-db)#
N5548-Bottom(config-vsan-db)#
N5548-Top(config)#
N5548-Top(config-vsan-db)#
N5548-Top(config-vsan-db)#
© 2014 Cisco | IBM. All rights reserved.
vsan database
vsan 201
vsan 201 interface vfc1032
interface fc 1/48
switchport mode F
interface fc 1/48
switchport mode F
vsan database
vsan 200 interface fc
vsan database
vsan 201 interface fc
1/48
1/48
Page 25