Cisco Nexus B22 Design And Deployment Manual page 12

6. Repeat the steps on the second Cisco Nexus 5000 Series Switch connected to the fabric extender in
interconnect bay 4:
N5548-Top# configure terminal
N5548-Top(config)#
N5548-Top(config)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
N5548-Top(config-if)#
7. Verify that the Cisco Nexus B22 for IBM is up and running:
switch(config-if)#
FEX FEX
Number Description
------------------------------------------------------------------------
192 FEX0192
A pair of fabric extenders now is configured in straight-through mode, also known as a single-attached
configuration, and each is communicating with its respective Cisco Nexus switch. The links between the two
Cisco Nexus switches and the Cisco Nexus B22 fabric extenders use Port Channels for connectitivity.
© 2014 Cisco | IBM. All rights reserved.
feature fex
fex 192
interface port-channel
switchport mode fex-fabric
fex associate 192
interface ethernet
switchport mode fex-fabric
fex associate 192
channel-group 192
interface ethernet
switchport mode fex-fabric
fex associate 192
channel-group 192
show fex
FEX
State
Online
192
1/17
1/18
FEX
Model Serial
N2K-B22IBM-P FOC1730R0XQ
Page 12