Basket - AEG FSE21200P User Manual

Problem
Black or gray
marks on
dishes
Detergent left
in dispenser
cups
unsatis The dishes
-factory are not drying
drying
result
8.2 Error Codes
when some malfunctions come on, the
appliance will display error codes to warn
you:
Codes Meanings
E1 longer inlet
time.
E2 Not reaching
required
temperature.
Possible Causes
aluminum utensils
have rubbed
against dishes.
Dishes block
detergent cups.
improper loading
Too little rinse-aid
Dishes are removed
too soon.
wrong programme
selection
using cutlery with a
low-quality coating
Possible
Causes
Faucets is not
opened, or
water intake is
restricted, or
water pressure
is too low.
Malfunction
of heating
element.
What To Do
use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
load the dishwasher as suggested in
the directions.
Increase the amount of rinse-aid/Refill
the rinse-aid dispenser.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can escape. Begin unloading the
dishwasher only once t he dishes are
barely warm to the touch. Empty the
low basket first. This prevents water
form dropping off dishes in the upper

basket.

in short programmes the washing
temperature is lower.
This also lowers cleaning
performance. Choose a programme
with a long washing time.
Water drainage is more difficult with
these items.
Cutlery or dishes of this type are
not suitable for washing in the
dishwasher.
E3 Overflow.
E4 Failure of
communication
between main
PCB with TFT
PCB
WARNING!
• If overflow occurs, turn off the
main water supply before calling a
service.
ENGLISH 23
Some element
of dishwasher
leaks.
Open circuit
or break of
wiring for the
communication