AEG FSE52607P User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSE52607P
  6. User manual

AEG FSE52607P User Manual

Hide thumbs Also See for FSE52607P:
Table of Contents

Advertisement

Quick Links

Download this manual
FSE52607P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSE52607P

Summary of Contents for AEG FSE52607P

  • Page 1 FSE52607P User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................27 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.

  • Page 6: Product Description

    2.7 Disposal displays, pressure switches,...

  • Page 7: Control Panel

    ENGLISH 3.1 Beam-on-Floor • The red light flashes when the appliance has a malfunction. The Beam-on-Floor is a light that is The Beam-on-Floor is off displayed on the floor below the when the appliance is appliance door. deactivated. • A red light comes on when a programme starts.

  • Page 8: Programme Selection

    Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning".
  • Page 9 ENGLISH It adjusts the temperature and quantity of water as well as the wash duration. 5.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower •...

  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 11.2 0.610 11.9 0.880 1h 30min 11.7 0.970 2h 40min 11.9 1.010 10.5 0.936 AUTO Sense 11.8 0.980 Machine Care 10.5 0.540 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH Number Setting Values Description Latest pro‐ Enable or disable the automatic selection gramme selec‐ Off (default) of the most recently used programme and tion options. 1) For more details, refer to the information provided in this chapter. 6.1 The water softener You can change the basic settings in setting mode.
  • Page 12 Regardless of the type of detergent Subsequently, the rinsing of the water used, set the proper water hardness softener that lasts 5 minutes may begin level to keep the salt refill indicator in the same cycle or at the beginning of active.
  • Page 13 ENGLISH 6.3 End sound 6.5 Key tones You can activate an acoustic signal that The buttons on the control panel make a sounds when the programme is click sound when you press them. You completed. can deactivate this sound. Acoustic signals sound also 6.6 Latest programme when a malfunction of the selection...

  • Page 14: Before First Use

    To enter setting mode, press and hold 2. Press OK to enter the setting. • The bar of the ECOMETER simultaneously dedicated to the chosen setting is about 3 seconds. on. The other bars are off. The lights related to the Previous, OK •...

  • Page 15: Daily Use

    ENGLISH CAUTION! CAUTION! Water and salt can come out Only use rinse aid designed of the salt container when specifically for dishwashers. you fill it. After you fill the 1. Open the lid (C). salt container, immediately 2. Fill the dispenser (B) until the rinse start the shortest programme aid reaches the marking ''MAX''.
  • Page 16 2. Put the detergent, in powder or Not all options are tablets, in the compartment (B). compatible with each other. 3. If the programme has a prewash phase, put a small quantity of Activating options often detergent on the inner part of the increases the water and appliance door.

  • Page 17: Hints And Tips

    ENGLISH If you cancel the delay start, If the door is opened for you have to select the more than 30 seconds programme again. during the drying phase, the running programme ends. It 8.7 How to cancel a running does not happen if the door is opened by AirDry function.
  • Page 18 9.2 Using salt, rinse aid and 4. When the programme is completed, adjust the water softener according detergent to the water hardness in your area. 5. Adjust the released quantity of rinse • Only use salt, rinse aid and detergent aid.

  • Page 19: Care And Cleaning

    ENGLISH 9.6 Unloading the baskets After the programme is completed, water can still 1. Let the tableware cool down before remain on the inside you remove it from the appliance. Hot surfaces of the appliance. items can be easily damaged. 2.
  • Page 20 10.4 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 10.5 Cleaning the filters 4. Wash the filters. The filter system is made of 3 parts.
  • Page 21 ENGLISH CAUTION! 3. To install the spray arm back, press it An incorrect position of the downwards. filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
  • Page 22 1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. To detach the spray arm (C) from the 4. To install the spray arm back, press...

  • Page 23: Troubleshooting

    ENGLISH 11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
  • Page 24 Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water does ter inside the appliance is not exceed 60°C. too high or malfunction of • Switch the appliance off and on.
  • Page 25 ENGLISH Once you have checked the appliance, The PNC can be found on the rating deactivate and activate the appliance. If plate on the appliance door. You can the problem occurs again, contact an also check the PNC on the control panel. Authorised Service Centre.
  • Page 26 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid level to a higher level. • The quality of the rinse aid can be the cause.

  • Page 27: Technical Information

    ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure bar (minimum and maximum)
  • Page 28 www.aeg.com/shop...

Table of Contents