Spray Arms - AEG FSE21200P User Manual

22 www.aeg.com
Noise
unsatis
-factory
washing
result
Problem Possible Causes
a programme
was not run after
dishwasher salt was
added.
Traces of salt have
got into the wash
cycle.
The lid of softer is
loose.
knocking The spray arm is
noise in the knocking against an
wash cabinet item in a basket.
Rattling noise item of crockery are
in the wash loose in the wash
cabinet cabinet.
knocking This may be
noise in the caused by on-site
water pipes installation or the
cross-section of the
piping.
The dishes The dishes were
are not clean not loaded correctly.
The programme
was not powerful
enough.
Not enough
detergent
was dispensed.
item are blocking
the path of spray
arms.
The filter
combination in
the base of wash
cabinet is not clean
or is not correctly
fitted. This may
cause the spray
arm jets to get
blocked.
Cloudiness on Combination of soft
glassware water and too much
detergent.
What To Do
always run the Quick wash
programme. without any crockery in
the dishwasher and without selecting
the Turbo function (if present), after
adding dishwasher salt.
Check the lip .Ensure the fix is fine.
interrupt the program, and rearrange
the items which are obstructing the
spray arm.
interrupt the program, and rearrange
the items of crockery.
This has no influence on dishwasher
function. if in doubt, contact a suitably
qualified plumber.
See notes in "loading the Dishwasher
Baskets".
Select a more intensive programme.
See "wash Cycle Table".
use more detergent, or change your
detergent.
Rearrange the items so that the spray
can rotate freely.
Clean and/or fit the filter combination
correctly.
Clean the spray arm jets. See
"Cleaning the Spray arms".
use less detergent if you have soft
water and select a shortest cycle to
wash the glassware and to get them
clean.