Advertisement
Quick Links
Advertisement
Related Manuals for Danfoss AK-LM 330
Summary of Contents for Danfoss AK-LM 330
- Page 1 User Guide Monitoring unit AK-LM 330 ADAP-KOOL® Refrigeration control systems...
- Page 2 Regarding the use of AKM, reference is made to the AKM Manual. Validity This menu operation (from September 2012) applies to controller type AK-LM 330, code Nos 080Z0170 with programme version 1.4x. Function groups The operation is divided up into several function groups.
- Page 3 • 2 volt inputs • 8 digital alarm inputs • 2 consumption gauges If it is necessary to obtain access to all measurements and settings, see Using Service Tool, type AK-ST 500. AK-LM 330 Vers. 1.4x Menu operation RC8CC202 © Danfoss 09/2012...
-
Page 4: Select Application
When “ON”, the controller is in alarm condition. 5, 6, 7, 8 Same function as for "Thermostat 1". Settings Main switch Main switch: Regulation OFF: Controller stopped 5, 6, 7, 8 Same function as for "Thermostat 1". Menu operation RC8CC202 © Danfoss 09/2012 AK-LM 330 Vers. 1.4x... -
Page 5: Voltage Inputs
Definition of the reading at the voltage area's lowest value V1 Max read out Definition of the reading at the voltage area's highest value. There are similar settings for "Volt 2". AK-LM 330 Vers. 1.4x Menu operation RC8CC202 © Danfoss 09/2012... - Page 6 Define how many pulses are to be received for each unit of measure UM1 Scale factor Set scale factor, if required UM1 Preset counter The counter can be reset here. There are similar settings for "Utility Meter 2". Menu operation RC8CC202 © Danfoss 09/2012 AK-LM 330 Vers. 1.4x...
-
Page 7: Display Control
Definition of pressure transmitter type and pressure area for "Paux 1" AKS 32 -6 defined with setting = 1 AKS 32 -9 defined with setting = 4 AKS 32 -12 defined with setting = 7 AK-LM 330 Vers. 1.4x Menu operation RC8CC202 © Danfoss 09/2012... -
Page 8: Alarm Priorities
As for V1 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.