About Using Z-Wave As I/O - Axis M5065 User Manual

AXIS M5065 PTZ Network Camera
About wireless I/O (Z-Wave Plus
9. Select the preset position you want the camera to go to.
10. If you want the camera to return to it's home position, select Return to home when the rule is no longer active and
specify how long you want the camera to wait at the current preset position before returning to home.
11. Click Ok.
To record video, add an additional action rule:
12. Go to Events > Action Rules and click Add.
13. Select Enable rule and enter a descriptive name for the rule.
14. From the list of triggers, select PTZ and then select Preset Reached.
15. Select the preset position.
16. From the list of actions, select Record video.
17. Select an existing stream profile or create a new one.
18. Enable and set the pre-trigger time to 5 seconds.
19. Enable While the rule is active.
20. Enable and set the post-trigger time to 60 seconds.
21. Select SD card from the list of storage options.
22. Click Ok.

About using Z-Wave as I/O

This product does not have any physical I/O connectors, but you can use some Z-Wave functions through the I/O interface.
Each connected Z-Wave device is assigned an I/O port number. To see the port numbers, go to Setup > System Options > Ports &
Devices > I/O Ports. The I/O port number can be changed in the Z-Wave device's information window.
When used as an Digital Input Port event, only one function of the Z-Wave device can be used. The default function depends on what
type of device it is. To change which function is used, go to the device's information window.
For more information about using I/O ports see the product's built-in help.
®
)
41