Download Print this page

DeLonghi HCS Instructions Manual page 4

Electric convector heater

Advertisement

Important information for correct disposal of the product in accordance with
EC Directive 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It
must be taken to a special local authority differentiated waste collection centre or to
a dealer providing this service. Disposing of a household appliance separately avoids
possible negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out wheeled dustbin.
Electrical connection (U.K. only)
A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit
your socket, the plug should be cut off from the mains lead and an appropriate plug fitted, as
below.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp
fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse
using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug
must.
NOT be used until a replacement fuse cover can be obtained from your nearest electrical
dealer. The colour of the correct replacement fuse cover is that as marked on the base of the
plug.
WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in
a 13 Amp socket elsewhere in the house as this could cause a shock hazard.
B) UK Plug specifications: please follow the instructions provided below.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
If you have a 3-pins plug, do not connect any wire to the "earth" terminal.
4

Advertisement

loading