ZyXEL Communications NSG50 User Manual page 9

Type the user name (default: "admin") and password (default: "1234"). If the NSG is being managed or
3
has been managed by the NCC, check the NCC's Site-Wide > Configure > General setting screen for
the NSG's current password.
Click Login. After you log in for the first time using the default user name and password, you must
4
change the default admin password in the Update Admin Info screen. Type a new password of up to 63
printable characters without spaces, then click Apply.
The Login screen appears after you click Apply.
5
Chapter 1 Introduction
NSG Series User's Guide
9