Network Tool Screen - ZyXEL Communications NSG50 User Manual

The following table describes the labels in this screen.
Table 16 Maintenance > Diagnostics > Packet Capture > Files
LABEL
Remove
Download
#
File Name
Size
Last Modified

5.4 Network Tool Screen

Use this screen to ping or traceroute an IP address.
Click Maintenance > Diagnostics > Network Tool to display this screen.
Figure 30 Maintenance > Diagnostics > Network Tool
Chapter 5 Maintenance
DESCRIPTION
Select files and click Remove to delete them from the NSG or the connected USB storage
device. Use the [Shift] and/or [Ctrl] key to select multiple files. A pop-up window asks you to
confirm that you want to delete.
Click a file to select it and click Download to save it to your computer.
This column displays the number for each packet capture file entry. The total number of packet
capture files that you can save depends on the file sizes and the available flash storage space.
This column displays the label that identifies the file. The file name format is interface name-file
suffix.cap.
This column displays the size (in bytes) of a configuration file.
This column displays the date and time that the individual files were saved.
NSG Series User's Guide
31