APPLICATION CONSIDERATIONS
Geothermal Systems
Closed loop and pond applications require specialized design
knowledge. No attempt at these installations should be made unless
the dealer has received specialized training. It is recommend that
design and installation of the ground loop be per International
Ground Source Heat Pump Assoc. (IGSHPA) standards.
Anti- -freeze solutions are utilized when low evaporating conditions
are expected to occur. Refer to the Flow Center installation
manuals for more specific instructions.
(1) Line Voltage Disconnect (unit)
(2) Flex Duct Connection
(3) Low Voltage Control Connection
(4) Line Voltage Connection
(5) P/T Ports
(6) Vibration Pad
(7) Condensate Drain Connection
(8) Ground Loop Connection Kit
(9) Ground Loop Pumping Package
(10) Polyethylene with Insulation
(11) Line Voltage Disconnect (electric heater)
Fig. 2 - - Example Geothermal System Setup
installation and is for
illustration purposes
only. Ensure access to
Heat Pump is not
restricted.
3
Diagram shows typical
A14132