Table of Contents
Advertisement
*9 Set the virtual connection with a serial cable and interconnect
between devices.
*10 Transfer phonebook data on the handset memory to a
Bluetooth device. Data may not be displayed correctly on the
other party's device depending on the contents of the
transferred phonebook data.
*11 Join a PC network etc. and share the Internet connection. Also,
connect a PC etc. to the handset via Bluetooth to use the
Bluetooth tethering.
*12 Connect a Bluetooth Smart device such as a keyboard and
mouse to the handset to operate the handset from the device.
z
Refer to manuals of Bluetooth devices as well.
z
The settings of access points for DUN profile can be changed
from a Bluetooth device such as a PC or car navigation system.
If connection to an access point via DUN profile becomes
unavailable, it is recommended to initialize access points
☞
(
P. 154 "Resetting an access point").
z
Audio may not be output with Bluetooth devices which are not
compatible with SCMS-T depending on the data type.
Precautions about handling Bluetooth devices
Note the followings when using Bluetooth devices.
z Note the followings to make good connection.
„ Keep the distance between the handset and another
Bluetooth device within approximately 10 m with no
obstructions in sight. The distance within which you can
make connection may be shorter when there are
obstructions between them or depending on the conditions
of the surroundings (such as walls or furniture) and the
structure of a building. Especially when there is a wall, floor
or ceiling of reinforced concrete between them, they may be
unable to connect with each other. Note the above
mentioned distance is not guaranteed.
„ Move the handset and another Bluetooth device as far away
as possible from home electric appliances, AV devices, OA
devices, etc. before connection. Bluetooth devices are liable
to be adversely affected by a microwave oven, so move
them as far away as possible from the microwave oven while
using them. Otherwise, normal connection cannot be
performed when other electric devices are powered on or
Bluetooth devices may cause noises or reception failure on
a TV or radio set.
„ Move the other party's Bluetooth device to a place where
connection is possible when there is a broadcast station,
radio, etc. near the Bluetooth device and the handset cannot
be connected to the device. Strong radio waves may prevent
connection between Bluetooth devices.
174
Data Communication
Advertisement
Table of Contents
