Epson XP-30 Start Here

Start Here

EN
TC
安裝說明
© 2012 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX
Contents may vary by location.
Unpacking
內容物會因國家 / 地區而不同。
清點配件
1
A
Turning On
開啟電源
2
Connect and plug in.
連接電源線並插入電源插座。
Q
Do not open the ink cartridge package until you are ready to install it in the
printer. The cartridge is vacuum packed to maintain its reliability.
在將墨水匣安裝至印表機之前，請勿打開墨水匣的包裝。為了維持墨水匣
列印穩定性，墨水匣採真空包裝。
Remove all protective materials.
移除保護膠帶。
B
Turn on.
開啟電源。
Q
Installing the Ink
Cartridges
For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot be saved
for later use.
安裝墨水匣
初次安裝時，務必使用本印表機隨附的墨水匣。這些墨水匣無法留作日後使用。
3
A B
Open. Shake only BLACK new cartridge.
打開印表機上蓋。 僅限搖晃新的黑色墨水匣。請勿搖晃其他彩色墨水匣。
D
Insert all four cartridges. Press each one until it clicks.
安裝 4 個墨水匣。逐一推入，直到卡入為止。
G
Wait about 4 minutes.
等候約 4 分鐘。
C
Do not shake other color cartridges. Remove yellow tape.
只撕下黃色標籤。
E F
Close. Press.
闔上印表機上蓋。 按下。
Q
The initial ink cartridges will be partly used to charge the print head. These
cartridges may print fewer pages compared to subsequent ink cartridges.
內附的墨水匣，其中有部分墨水會用在印字頭墨水設定上。這些墨水匣的列
印頁數可能少於其後安裝的墨水匣。