Specifications; Control Panel - Vitamix VM0102D Owner's Manual

SAVE THESE INSTRUCTIONS
To Avoid Injury.
Read and understand instruction manual
before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not
intended to be used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be
performed by Vitamix or an authorized service representative.
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
other liquid.
Failure to follow instructions can cause
death or electrical shock.
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT
SAFEGUARDS AND THE IMPORTANT INSTRUCTIONS FOR SAFE
USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID
YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.
WARNING
WARNING
s
p e c I f I c at I o n s
5300 - VM0102D
Vitamix
®
Motor:
2.1 peak output horsepower motor
Electrical:
120 V, 50-60 Hz, 11.5 A
Uses a U.S.A. three–prong grounded cord.
Dimensions:
Height: 17.25 in. / 43,9 cm
Width: 8.8 in. / 22,4 cm
Depth: 9 in. / 22,9 cm
c
o n t r o L
3
4
The On/Off Switch controls the power to
On/Off Switch (l)/(O):
1
the machine base. The On/Off Switch is located on the front of
the machine. Move the On/Off Switch to the Off (O) position at
night and whenever the machine is left unattended.
Start ( ) / Stop ( ) Switch:
2
that the Variable Speed Dial is pointed at Variable Speed
1. Pressing down on the Start/Stop Switch will initiate the
blending process. Pressing down again on the Start/Stop
Switch again will stop the blending process.
The Variable Speed Dial selects blade
Variable Speed Dial:
3
rotation speeds from 1 to 10 (low to high). Always begin the
blending process with the Variable Speed Dial pointed at
Variable Speed 1.
Pressing down on the Pulse Switch will cause
Pulse Switch ( ):
4
the machine to blend at the speed setting shown on Variable
Speed Dial for as long as the Pulse Switch is held down
p
a n e L
2
1
Before starting, always make sure
.
3