Whirlpool W Collection series Daily Reference Manual page 6

4. Connect to WiFi
Follow the scan-to-connect setup procedure. The app
will guide you through the process of connecting
your appliance to the wireless network in your home.
If your router supports WPS 2.0 (or higher), select
"MANUALLY", then tap "WPS Setup": Press the
WPS button on your wireless router to establish a
connection between the two products.
If necessary you can also connect the product
manually by using "Search for a network".
The SAID code is used to synchronise a smart device with
your appliance.
MAC address is displayed for the WiFi module.
The connection procedure will only need to be
carried out again if you change your router settings
(e.g. network name or password or data provider).
6
. SETTING THE TIME AND DATE
Connecting the oven to your home network will set
the time and date automatically. Otherwise you will
need to set them manually.
• Tap the relevant numbers to set the time.
• Tap "SET" to confirm.
Once you have set the time, you will need to set the
date.
• Tap the relevant numbers to set the date.
• Tap "SET" to confirm.
4. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it.
Heat the oven to 200 °C, ideally using the "Fast preheat"
function .
It is advisable to air the room after using the appliance for the
rst time.