Change Service Level - Motorola T5ZX1 User Manual

Features
not enter your unlock code within 30 seconds, an
alerting call will be placed to the phone number you
have stored in this feature. If the phone receives a
busy signal, it will repeat the call automatically.
Anyone answering the call will hear alternating
high and low pitched tones (siren). If you elected
to have the Auxiliary Alert feature installed, the
auxiliary alerting device will also be activated. The
phone will then repeat the call.
The removal of the control unit will not prevent
your mobile telephone from attempting to place
the call. However, if the antenna has been
removed, the phone will be prevented from
successfully completing the call. The Auxiliary
Alert device will still be activated.
NOTE If you inadvertently trip the theft alarm and
the alarm call is placed, you can stop the alarm by
entering your three-digit unlock code. This feature
must be reset in the feature menu each time the
phone is disarmed.
If PIN code is activated, the theft alarm will not
work as the PIN code must be sent manually in
order to complete the call.

Change Service Level

1. Press Ï, ‚.
2. Enter your six-digit security code.
3. Enter the number of the service level you
wish to use.
4. Press Ø. The phone will display service
level and the number selected.
62