Table of Contents
Advertisement
it displays a message indicating which home
system type and phone number is currently active.
The message shows the system type and phone
number applied, as follows:
System Type and
Phone Number
Non-wireline or A type
with phone number 1
Non-wireline or A type
with phone number 2
Wireline or B type with
phone number 1
Wireline or B type with
phone number 2
If a call is placed to the inactive phone number,
the caller will receive the recorded 'Not In Service'
message.
When you turn your phone on, the telephone will
remember which system was active when you
turned it off. That system will stay active until you
change to the other system with the sequence ‰,
£, Ø. You cannot switch systems during a call.
If you enter the sequence during a call, the phone
will wait until the call is terminated and the In Use
indicator is extinguished before switching systems.
Each system (and phone number) has its own
Selectable System Registration state that you may
program (see page 68). That is, you can select
Home Only for system 1 (and phone number 1) and
Basic Operation
Display
A 1
A 2
B 1
B 2
23
Advertisement
Table of Contents
