Motorola T5ZX1 User Manual page 45

Memory
wait for the next system response and press
the One Touch Dial key again.
IMPORTANT If your credit card number is stored
in a Turbo Dial location, you must press Í rather
than the Turbo Dial key to send additional groups
of numbers.
EXAMPLE Use the credit card information stored
in One Touch Dial location 1 to place a credit card
call to a ten-digit phone number stored in memory
location 3.
Instruction and Key
Sequence
Recall and send your credit card
1
number. In this example, use One
Touch Dialing. Press and hold
≈ for one second.
Enter and send the phone number
2
you wish to call. In this example,
memory location 3 is sent via Turbo
Dialing. Press and hold ‹ for one
second. (The Signal Strength Meter
will display and the In Use light will
begin to flash to let you know that
the call has been initiated.)
3 Send the final series of digits
(i.e., your credit card PIN
number) after you hear the
system response. (You will hear
the tones as the digits are sent.)
44
Display
ENTER
NUMBER
S––––––
S––––––