Table of Contents
Advertisement
PLAYBACK
Turn on the TV, then set it to the preset
video channel or AV mode (if using the
"AV connection").
Insert a recorded video cassette.
Cassette
loading
Gently push the centre of the cassette
until it is loaded automatically.
F
n
*t3aaure-Prevention
tab
Press the PLAY button.
stop
Press the STOP button.
Eject the cassette
Press the EJECT button on the VCR.
Rewind
Press the REW button during stop or reverse
search operation.
Fast-forward
Press the FF button during stop or forward
search operation.
Variable playback modes
Forward search
Press the FF button during playback or
fast-forward operation.
Reverse
search
Press the REW button during playback or
rewind operation.
Still picture
Press the PAUSE/STILL
button during normal
playback.
Frame
advance
Press the PAUSEK3TILL
button during still
picture.
Note:
If still picture is continued for about five
minutes, the VCR will automatically
change to
stop mode in order to prevent the tape from
being damaged.
Playback of an NTSC tape
This VCR can playback an NTSC tape on a
PAL (B/G) or NTSC 4.43 system TV.
NTSC
Select the TV system on the VCR to match
the system of the TV used, as indicated below.
1
Press the SYSTEM button.
z
Press the CH+button.
TV system
VCR display
!
PAL (B/G)
I
NTSC4.43
s
Press the SYSTEhl button.
When you playback an NTSC tape on a PAL
TV,
If the image is unstable, rolling vertically,
use the TV vertical hold button to stabilize
the image.
The image may shrink vertically and a
black band may appear at the top and
bottom of the screen.
Notes about NTSC tape
An NTSC tape cannot be copied normally.
Picture quality of NTSC tapes cannot be
guaranteed
with this VCR.
Counter memory
This convenient feature for finding the
beginning of a specific recording etc., is made
possible by the "Linear Time counter" that
indicates the tape run time in hours, minutes
and seconds.
1
press the RESET then the MEMORY
button before starting recording or playback.
The zero point of the counter is now
memorized and the memory indicator
"~"
will illuminate.
z
Press the REWbutton
attheend
of the
recording or playback, the tape will be
rewound and stop automatically
at the
memorized position.
Notes:
Whenever you load a cassette tape, the
counter is reset to "0:00:00".
If you play back a blank tape or a blank
portion of tape, the counter will not operate.
3
BASIC OPERATION
#
CH (+)
SYSTEM
RESET
MEMORY
PLAY
REW
FF
STOP
P#W:E[
EJECT
huto power on
rhe power is automatically
;witched on as a cassette is
nserted while the VCR is in the
;tand-by mode.
Auto play
rhe VCR will play back a tape
~utomatically when a video
~assetteis inserted whose
*erasure-prevention tab has been
removed,
Auto eject
When a video cassette without an
*erasure-prevention tab is played
to the end of the tape, the tape
~ill be automatically rewound and
then the cassette will be ejected.
Stand-by mode eject
The video cassette will be ejected
when the EJECTbutton is
pressed, even when the VCR is in
stand-by mode.
10
Advertisement
Table of Contents
