Save, Edit, Or Delete A Waypoint - Humminbird 700 Series Operating Manual

Save, Edit, or Delete a Waypoint

Save your current position as a waypoint: On any view, press the MARK key to
save the current position of the boat as a waypoint.
Save the cursor position as a waypoint: On the Chart or Chart Combo Views, use
the 4-WAY Cursor Control key to move the cursor to the position you want to save
as a waypoint. Then press the MARK key to save the position as a waypoint.
Save a position from the sonar history: On any Sonar View, Side Imaging®, or
Down Imaging™ View, use the 4-WAY Cursor Control key to move the cursor to a
feature in the sonar history (also called the Sonar Saver feature). Press the MARK
key to create a waypoint at the location where that sonar reading was taken. The
new waypoint will also record the depth at that location.
NOTE: When you save a waypoint by any of these methods, a numerical waypoint
name is automatically assigned. You can edit the waypoint information later to give
it a different name and select an icon to represent it (see Program or Edit the
waypoint fields).
Display the Waypoints Submenu: From any view, press the MENU key twice to
display the Main Menu, then use the RIGHT Cursor key to select the Navigation
tab. Select Waypoints, and press the RIGHT Cursor key to display the Waypoints
submenu.
71 Introduction to Navigation