Advertisement
Available languages
Available languages
CANISTER
1. Open the canister hood,
2, Check to see that the dust bag is proper-
ly installed, See BAG CHANGING
for
instructions.
3. Check to see that the motor safety filter is
properly installed
See MOTOR SAFETY
FILTER CLEANING
for instructions.
HOOD
It is normal for the canister hood to come off
when opened further than needed_ Line up
the hinges, insert them, and close the hood
to replace
ito
HOSE
Hose
Latch
Tab
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
To remove:
lift
hose latch tab
upward and pull
up on hose.
Handle
Handle
Quick
Release
(Some
2. Insert
handle into
wand until
lock button
snaps in
place. Be
sure hose
is not
twisted.
To remove:
press han-
dle release
button and
pull up on
handle.
To store:
Disconnect
hose from wands and
canister to prevent stress on hose during
storage.
Store hose in a loosely coiled
position so the hose covering is not
stressed_
Hood and
Attachment
Cover
Canister
Performance
Indicator Light
(Some Models)
Performance
Indicator
(Some Models)
Dust Bag
Advertisement
