Certifications - Teledyne HVD3000 Operating Manual

Certifications

Teledyne LeCroy certifies compliance to the following standards as of the time of
publication. As standards evolve, these certifications may no longer be current. Please see
the EC Declaration of Conformity certificate shipped with your product.
EMC Compliance
EC Declaration of Conformity - EMC
The probe meets the intent of EC Directive 2014/30/EU for Electromagnetic Compatibility.
Compliance was demonstrated to the following specifications as listed in the Official
Journal of the European Communities:
EN 61326-1:2013, EMC requirements for electrical equipment for measurement, control,
and laboratory use.
1. This product is intended for use in nonresidential areas only. Use in residential areas may cause EM interference.
2. Emissions exceeding the levels required by this standard may occur when product is connected to a test object.
3. To ensure compliance with the applicable EMC standards, use high quality shielded interface cables.
E C
UROPEAN ONTACT
Teledyne LeCroy Europe GmbH
Im Breitspiel 11c
D-69126 Heidelberg Germany
Tel: + 49 6221 82700
Australia & New Zealand Declaration of Conformity—EMC
The probe complies with the EMC provision of the Radio Communications Act per the
following standards, in accordance with requirements imposed by Australian
Communication and Media Authority (ACMA):
AS/NZS CISPR 11:2011 Radiated and Conducted Emissions, Group 1, Class A.
A / N Z
USTRALIA EW
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067
* Visit teledynelecroy.com/support/contact for the latest contact information.
1, 2, 3
:*
C :*
EALAND ONTACTS
RS Components Ltd.
Unit 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
Operator's Manual
39