Table of Contents
Advertisement
Indicators on the display panel
A Playback channel indicator
The letters (L, C, R, etc.) indicate the channels
being played back. Based on the speaker
settings, the box around the letter(s) vary to
show how the receiver downmixes the source
sound.
L
Front Left
R
Front Right
C
Center (monaural)
SL
Surround Left
SR
Surround Right
S
Surround (monaural or the
surround equipment obtained
by Pro Logic processing)
B SW
Lights up when the audio signal is output from
the SUBWOOFER jack.
C
Lights up when the disc being played back
contains an LFE (Low Frequency Effect)
channel and the LFE channel signal is actually
being reproduced.
D Input indicator
Lights up to indicate the current input.
COAX
Lights up when BD/DVD is selected. However,
––––––
"
" appears on the display if no digital
signal is input through the COAXIAL jack (page
15).
OPT
Lights up when GAME or SAT/CATV is
selected. However, "
display if no digital signal is input through the
OPTICAL jack (page 16).
6
GB
––––––
" appears on the
E DTS indicator
Lights up the respective indicator when the
receiver is decoding the corresponding DTS
format signals.
DTS
DTS 96/24
Note
When playing a DTS format disc, make sure that
you have completed the digital connections.
F LPCM
Lights up when the receiver is decoding the
Linear PCM signals.
G USB*
Lights up when a USB device is being played.
H
D
Lights up when the receiver is decoding Dolby
Digital signals.
Note
When playing a Dolby Digital format disc, make
sure that you have completed the digital
connections.
I Dolby Pro Logic indicator
Lights up the respective indicator when the
receiver performs Dolby Pro Logic processing.
This matrix surround decoding technology can
enhance input signals.
PL
PL II
DTS
DTS 96 kHz/24 bit
Dolby Pro Logic
Dolby Pro Logic II
Advertisement
Table of Contents
