Connections; 1: Installing The Speakers - Sony HT-M2 Operating Instructions Manual

Connections

1: Installing the speakers

This receiver allows you to use a 4 channel
speaker with 2 subwoofer system.
Example of speaker system
configuration
You can enjoy different sound effects from the
system by placing the speakers as shown
below.
AFront speaker (left)
BFront speaker (right)
CSurround speaker (left)
DSurround speaker (right)
ESubwoofer
Installing all the speakers in
front position
Installing the surround
speakers in rear position
12
GB
Notes
• Do not install the speakers on a wall.
• We recommend that you place the front and
surround speakers on a speaker stand (not
supplied).
Tips
• The angle A should be the same.
A
• Since the subwoofer does not emit highly
directional signals, you can place it wherever you
want.
Installing the speakers on a flat
surface
Before you install the front speakers, surround
speakers and subwoofers, be sure to attach the
supplied foot pads to prevent vibration or
movement as shown in the illustration below.
Note
Attach the small foot pads to the surround speakers
and the big foot pads to the front speakers and
subwoofers.
A