Related Manuals for DieHard 200.71990
Summary of Contents for DieHard 200.71990
- Page 1 OPERATOR’S MANUAL ® Jump Starter/DC Power Source Model No. 200.71990 CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. 00-99-000867/0808...
- Page 2 DieHard product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other DieHard outlet in the United States for free replacement.
-
Page 3: Important Safety Instructions
IMPORTANT: CHARgE IMMEDIATELY AfTER PURCHASE IMPORTANT: READ AND SAvE THIS SAfETY AND INSTRUCTION MANUAL. IMPORTANT SAfETY INSTRUCTIONS Charge the internal battery immediately upon purchase, every 30 days and after every use. Use in a well ventilated space. Contains a sealed, non-spillable lead-acid battery. Must be disposed of properly. - Page 4 OPERATINg INSTRUCTIONS Warning: Failure to follow instructions may cause damage or an explosion. Read entire instruction manual before use. Turn ignition OFF before making cable connections. Use in a well-ventilated area. Keep clear of fan blades, belts, pulleys and other parts that may cause injury.
-
Page 5: Digital Display
DIgITAL DISPLAY The display can be used to indicate a battery’s voltage when connected to a battery or the percentage of charge in the jump starter’s internal battery. With the switch in the OFF position, connect the clamps to the vehicle’s battery and its voltage is displayed. -
Page 6: To Order And Replace Jaws
TO ORDER AND REPLACE JAwS Part Number 2299001580 Battery Clamp Jaw Replacement • Secure clamp in open position using a vise or equivalent clamping device. IMPORTANT: Make sure the rotary switch on the front panel is in the O (OFF) position and the jump starter is not plugged into a 110V AC electrical wall outlet. - Page 7 • •...
- Page 8 • •...