Table of Contents
Advertisement
56
VOICE RECOGNITION
followed by the artist or song
name, or Tune followed by the
radio station number.
Navigation destinations can be
made in a single command using
keywords. A few examples are: I
want directions to an address, I
need to find a Place of Interest or
(POI), or Find contact.
The system responds by
requesting more details. For other
POIs, say the name of a category
like Restaurants, Shopping
Malls, or Hospitals.
Navigating to a destination
outside of the current country
takes more than one command.
The first command is to tell the
system where the navigation will
take place, such as an Address,
Intersection, POI, or Contact.
If Address or Intersection is
selected, the second command is
to say, Change Country. Once the
system responds, say the country
before saying the rest of the
address and/or intersection.
If POI is asked for, say Change
Location, then Change Country.
Direct commands might be more
clearly understood by the system. An
example of a direct command would
be Call <number>. Examples of these
direct commands are displayed on
most of the screens while a voice
session is active. If Phone or Phone
Commands, is spoken, the system
understands that a phone call is
requested and will respond with
questions until enough details are
gathered to make a call.
If a cell phone number has been saved
with a name and a place, the direct
command should include both, for
example Call <name> at work.
Using Voice Recognition for List
Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list.
When a display contains a list, there
may be options that are available but
not displayed. The list on a voice
recognition screen functions the same
as a list on other displays. Scrolling or
flinging can be used to help display
other entries from the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
current voice recognition event and
plays the prompt Please select
manually or touch the Back icon on
the infotainment display to try again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was initiated.
The Back Command
Say Back or touch the Back icon on
the infotainment display to go to the
previous display.
If in voice recognition, and Back is
spoken all the way back to the
starting display, and then Back is
spoken one more time, the voice
recognition session will cancel.
Advertisement
Table of Contents
