GMC CADILLAC USER EXPERIENCE System Manual page 41

40 NAVIGATION
3D Landmark (Default is On) :
Touch On or Off. When turned on, the
system will display all 3D Landmarks
on the map depending on the zoom
level.
3D Building (Default is Off) : Touch
On or Off. When turned on, the
system will display all of the possible
3D building shapes on the map
depending on the zoom level.
Show Terrain in 3D (Default is
Off) : Touch On or Off. When turned
on, the system will display terrain
information on the map in 3D view.
Auto-Zoom (Default is On) : Touch
On or Off. When turned on, the
system will automatically adjust the
zoom level when the vehicle is
approaching a turn. After the turn is
completed, the system automatically
brings the zoom back to the originally
set level. If the vehicle is approaching
a turn with the next turn occurring
shortly after, the Auto-Zoom will
remain on until both turns are
completed.
Route Preferences
Touch to access the Route
Preferences. The choices are:
Preferred Route Choose from
two different route options:
Fastest or Eco-Friendly.
Fastest would be the route with
the shortest drive time.
Eco-Friendly would be the most
fuel-efficient route.
Avoid on Current Route
any of the road features to avoid
while on route:
Highways
Unpaved Roads
Ferries
Carpool Lanes
Toll Roads
Tunnels
Country Borders
Range Projection (Electric Vehicles)
Range Projection allows the vehicle s
electric driving range to be checked at
that moment.
Touch the Range Projection icon to
display the map screen with a range
indicator.
Navigation Voice Control
Touch to access the voice control
setting display.
Navigation Volume
volume level, touch the up and
down arrows. If the voice guidance
prompt is being heard, volume can
also be adjusted using the knob on
Choose
the center stack or the volume
switch on the steering wheel.
Navigation Voice Prompt Level
during a Call. Options
available are:
Full Prompt (Selected by
default)
Tone Only
None
Traffic Events
This feature provides a list of events
that are on the route or nearby.
A
Touch and then select Traffic
Events. An OnStar connected
navigation service plan is required.
To adjust the