Indoor Unit
1.10 Removal of Fan Rotor
Procedure
Step
1. Removing the drip proof
plate
1
Dismount the drip proof
plate (right) by
removing the 2 screws.
2
Unhook the fan motor
wire harness.
3
Remove the 2 screws
of the fan motor fixing
plate.
156
Warning
Be sure to turn off all power supplies at least 10 min. before
disassembling work.
Procedure
Preparation
Drip proof plate (right)
Remove the heat exchanger
according to the "Removal
of Heat Exchanger."
(R4406)
Fan motor
fixing plate
(R4409)
SiEBE04-507
Points
Removal Procedure