Spare Parts; Parts Order; Parts Groups Definition - Siemens SIMOTICS SD Operating Instructions Manual

Spare parts

10.1

Parts order

In addition to the exact part designation, please specify the machine type and the serial
number in all orders for spare parts and repair parts. The part designation must be identical
to the designation stated in the list of parts and specified together with the appropriate part
number.
When spare and repair parts are ordered, the following details must be provided:
● Designation and part number
● Order number and serial number of the machine
Spare parts information and database
Using the Siemens order number and the associated serial number, you can download spare
parts information from a database for almost all current motors → Spares On Web
(https://b2b-extern.automation.siemens.com/spares_on_web)
10.2

Parts groups definition

The following parts groups are differentiated:
Spare parts
Spare parts are machine parts that can be ordered during the production time and for a
further five years after discontinuation of production. These parts should be replaced only by
authorized service or modification partners.
Repair parts
Repair parts are machine parts that can be supplied during the active production of the
machine (until the product discontinuation).
Repair parts are parts used for the repair or modification of the current products. These parts
should be replaced only by authorized service or modification partners.
Standardized parts
Standardized parts are machine parts obtained from free trade outlets in accordance with
their necessary dimensions, materials and surface finish. A detailed list can be found in the
"Standardized parts" section.
Low-voltage motors
Operating Instructions, 05/2014, 5 610 00000 02 000
10
105