Table of Contents
Advertisement
Safety instructions
SafEty PRECaUtioNS!
Read and follow all safety instructions below carefully to avoid injuries or damages! Make sure that
Profoto Safety Instructions is always accompanied the equipment! Profoto products are intended for
professional use! The equipment is only intended for indoor photographic use. Use maximum 1200
W lamps.
Only use lamps and light shaping tools as specified by Profoto. Glass covers shall be changed if it has
become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks
or deep scratches. When placing a lamp into the holder ensure not to touch the bulb with bare hands.
Caution – Burn Hazard – Hot Parts!
4
Do not touch hot parts with bare fingers! Lamps, modeling lamps, flash tubes and certain metal parts emit
strong heat when used! Do not point lamps, modeling lamps or flash tubes too close to persons. All lamps
may on rare occasions explode and throw out hot particles!
NotiCE – Equipment overheating Risk
Do not obstruct ventilation by placing filters, diffusing materials, etc. over glass cover, lamp, modeling
lamp or flash tube.
www.profoto.com
Advertisement
Table of Contents
