Product Specifications; The Feature Of Product - Samsung ERV Operating Instructions Manual

2. Product Specifications

2-1 The Feature of Product

Energy Recovery Ventilation
The product helps save energy and drive down operation costs of heaters and coolers by recycling thermal energy (energy load)
efficiently.
Contaminated air with
high temperature and humidity
Heat Exchanged Fresh Air
Air Volume Control
Air volume control minimizes energy loss and cuts down on energy usage, even when duct resistance is low at the time of installation.
Automatic Operation
Operation mode and air volume are controlled automatically by sensing indoor and outdoor air conditions.
Exchange Mode
Heat-EX mode is utilized in summer and winter while usual ventilation mode is used in spring and autumn.
– Heat-Ex Mode : Energy loss is minimized by recycling energy exhausted when indoor heating and cooling.
– By-Pass Mode : The ventilation method is used when temperature gap of indoor and outdoor is not big. Outdoor air flows into
indoor.
High Sensibility Sensor (Option)
An optimal air condition is maintained through Carbon Dioxide (CO
Humidity Control
Fresh air conditions are guaranteed by recovering moisture in winter while exhausting it in summer.
Operation at Cold Area
Optimized automatic ventilation operation is conducted to prevent condensation and air volume reduction.
Low Noise and Low Power
With highly efficient motor and optimized system design, operation noise and electric consumption is minimized.
Samsung Electronics
Heat Exchange Element
Heat Exchange Element
Heat Exchange Element
Fresh air with Low Temperature
and Humidity
) sensor and temperature sensor.
2
Cold and Contaminated Air
2-1