Product Specifications; Switch Trigger - Sears 315.10186 Operator's Manual

PRODUCTSPECIFICATIONS
Chuck
. .......................................... 3/8 in. (10 ram) Keyless
Motor .............................................................. 14.4 Volt DC
Switch ....................................................... Vadab[e Speed
Gear Train ............................................................. 1 Speed
No Load Speed ................................................. 0-6501min.
KNOW YOUR DRILL-DRIVER
See Figure 1,
Before attempting to use your ddll-ddver,familiarize
yourself with all operating features and safety
requirements.
WARNING: Carefully read throughttdsentire
operator'smanual before usingyour new dhlt-dr'rvar.
Pay close attention to all Salety Rules, Warnings and
Cautions. It you use your drill-driverpropertyand
only for what it Is Intended, you will enjoy years of
safe, reliable service.
,_ WARN|NG: Do not allowJamiliaritywith your rid}l-
driver to make you careless. Remember that a
careless traction o1a second Is suff_em to Inflict
severe injury.
KEYLESS CHUCK
Yourdrift-driver h as a keylesschuckthatallowsyou to hand
_ghten or releasedrillbit in the chuckjeers.
DIRECTION OF ROTATION SELECTOR
FORWARD/REVERSE
Yourdrill-driverhas a forward/reverseselector located
above t_e sw}tchtrigger.The sw_chtdgger can be locked
in the OFF position.
C[utoh............................................................... 4 Positions
Charger input ........................ _ ........ 120 V. 60 Hz, AC only
Charge Rate ....................................................... 3-6 Hours
Torque.................................................................... 90 In.lb.
SWITCH TRIGGER
To turn your drill.driverON, depressthe switchtrigger.
Release switchtrigger to turnyour drill-driverOFF.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased triggerpressure.Speed is controlled
by the amount of switch tdgger dapmse)on.
BIT STORAGE
When not In usa, bits pro'tidedwith your clflfl-drivar c an be
placed _ the storage area locatedon the top of the motor
housing.
TORQUE ADJUSTMENT RING
Your drill Is equipped with an adjustabletorque rk'vg for
drivingdifferenttybes of screws intod_farent rnaterials.
The proper settingdepends on the type of material and
the size of the screw you are using.