Suspend Mode; Resume On Modem Ring - Switching On For Modem Ring; Resume On Time - Switching On At A Fixed Time; Resume Time - Setting The Switch-On Time - Siemens Mobile 750 Operating Manual

BIOS Setup

Suspend Mode

This field specifies where the system state is saved when the device is switched to suspend mode.
Save to DRAM
The system state is buffered in the DRAM memory.
The system state is saved to the hard disk, the system is switched off.
Save to Disk

Resume On Modem Ring - Switching on for modem ring

This field specifies whether the notebook is booted when a call is made to the connected modem.
This field can be operated only if Suspend Mode is set to Save to DRAM.
The function is disabled.
OFF
The function is enabled.
ON

Resume On Time - Switching on at a fixed time

This field specifies whether the notebook is booted at a specific time. The time is set in the Resume Time
field.
This field can be operated only if Suspend Mode is set to Save to DRAM.
The function is disabled.
OFF
The function is enabled.
ON

Resume Time - Setting the switch-on time

This field specifies whether the notebook is booted at a specific time.
This field can only be set if the Suspend Mode is set to Save to DRAM and the Resume On Time field is set
to ON.

Cooling Control - Cooling mode

This field defines the cooling mode.
When a certain temperature limit is exceeded in the system, the integrated fan is
Performance
switched on first. If the temperature nevertheless continues to increase, the clock
frequency of the processor is also reduced.
First the clock frequency of the process is reduced, then the integrated fan is switched
Silence
on.
62
Power menu - Setting energy saving functions
A26391-K84-Z100-1-7619