Settings In Bios Setup; Starting Bios Setup - Siemens Mobile 750 Operating Manual

Starting BIOS Setup

Settings in BIOS Setup

In BIOS Setup you can set the system functions and the hardware configuration of the notebook.
When it is supplied, the notebook is set to factory default settings. You can change these settings in
BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.
The BIOS Setup program contains the following menus:
•
Main Setup:
•
Advanced Setup:
•
Security Setup:
•
Power Setup:
•
Docking Setup:
•
Boot Setup:
•
Exit:
Starting BIOS Setup
²²
Restart the notebook (switching on/off or warm boot).
²²
When the message Press F2 for Setup appears, press the key
If a supervisor or user password has been defined:
i
²²
Enter the supervisor or user password and press the Enter key.
²²
If you have forgotten the user password contact your system administrator or contact
our customer service. If you have forgotten the supervisor password contact our
customer service.
If access to the setup is obtained with the user password, BIOS Setup settings in the Advanced, Security,
Docking and Boot menus are not possible.
A26391-K84-Z100-1-7619
for system settings as time, date, ports and pointing device
for extended functions
for setting up the security features
for setting up the power-management features
for configuring the MobiDock
for configuring the boot sequence
Exiting BIOS Setup
BIOS Setup
>)@
>)@
.
41