Integrated Peripherals - Ports And Controllers - Siemens Mobile 750 Operating Manual

Advanced menu - Advanced system settings

Integrated Peripherals - Ports and controllers

This field calls the submenu to make the settings for the ports and controllers.
Phoenix BIOS Setup
Advanced
Integrated Peripherals
PS/2 Mouse
COM port:
Base I/O Address:
IrDA port:
Mode:
Parallel port
Mode:
Diskette Controller:
On board IDE Adapter:
On Board Audio:
Base I/O Address:
IRQ Channel:
Capture DMA channel:
Playback DMA channel:
FM I/O:
MPU I/O:
Joystick:
FM I/O:
QuickPort Audio
Speaker:
Microphone:
↑↓
F1 Help Select Item
← →
ESC Exit Select Menu
Example for the submenu Integrated Peripherals
PS/2 Mouse
This field determines whether the PS/2 mouse or the touchpad is enabled on the notebook.
The internal touchpad is activated if no PS/2 mouse is connected. If a PS/2 mouse is
Enabled
connected when the system is started up, the PS/2 mouse is activated and the internal
touchpad is deactivated.
The internal touchpad and the PS/2 mouse are disabled.
Disabled
You must set Disabled if you want to use an external serial mouse.
The internal touchpad is activated if no PS/2 mouse is connected. If a PS/2 mouse is
Auto Detect
connected when the system is started up, the PS/2 mouse is activated automatically
and the internal touchpad is deactivated.
A26391-K84-Z100-1-7619
[Auto Detect]
[Enabled]
[3F8 IRQ4]
[Auto]
[IrDA]
[Auto]
[Bi-Directional]
[Enabled]
[Both]
[Auto]
[220]
[IRQ 5]
[DMA 1]
[DMA 3]
[388]
[300]
[Enabled]
[201]
[Notebook]
[Notebook]
Space Change Values
²
Enter Select Sub-Menu
Item Specific Help
F9 Setup Defaults
F10 Previous Values
BIOS Setup
49