Pci Devices - Pci Configuration - Siemens Mobile 750 Operating Manual

BIOS Setup

PCI Devices - PCI configuration

This field calls the submenu to select the settings for the PC card controller and the PCI slots.
Phoenix BIOS Setup
Advanced
PCI Devices
Cardbus Controller Select:
PCI IRQ line 1:
PCI IRQ line 2:
PCI IRQ line 3:
↑↓
F1 Help Select Item
← →
ESC Exit Select Menu
Example for submenu PCI Devices
If you use an operating system that does not support plug & play, you must select No for the
i
Plug&Play O/S field in the Advanced menu to ensure that the PC card controller is switched
on by the system BIOS.
Cardbus Controller Select - Settings of the PC Card Controller
This setting is only effective when a QuickPort Plus or a QuickPort S is connected. If the
i
QuickPort is not connected, the controller in the notebook is always configured to the
compatible address 3E0h.
This field specifies the order of the CardBus controller
External/Internal
The controller in the QuickPort Plus/S is configured to the compatible address 3E0h. A
secondary address is assigned to the controller in the notebook.
Internal/External
The controller in the notebook is configured to the compatible address 3E0h. A
secondary address is assigned to the controller in the QuickPort Plus/S.
External only The controller in the QuickPort Plus/S is configured to the compatible address 3E0h.
The controller of the notebook is disabled.
54
Advanced menu - Advanced system settings
[External/Internal]
[9]
[9]
[10]
Space Change Values
²
Enter Select Sub-Menu
Item Specific Help
F9 Setup Defaults
F10 Previous Values
A26391-K84-Z100-1-7619