Table of Contents
Advertisement
Chapter 4
Communication Ports
Figure 14: Port LEDs
1. Port LED
CONTENTS
•
Section 4.1, "Copper Ethernet Ports"
•
Section 4.2, "Fiber Optic Ethernet Ports"
Section 4.1
Copper Ethernet Ports
The RUGGEDCOM M2200 supports several 10/100Base-TX and 10/100/1000Base-TX Ethernet ports that allow
connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with Micro-D male connectors.
The Micro-D connectors are directly connected to the chassis ground on the device and can accept CAT-5 shielded
twisted-pair (STP) cables.
Pin-Out
The following is the pin-out description for the Micro-D connectors:
Figure 15: Micro-D 10/100/1000Base-TX Port Pin
Configuration
22
1
1
6
LED State
Yellow (Solid)
Yellow (Blinking)
Off
Name
Pin
10/100Base-TX
1
RX+
2
RX-
3
TX+
4
Reserved (Do
Not Connect)
5
Reserved (Do
Not Connect)
RUGGEDCOM M2200
Installation Guide
Description
Link established
Link activity
No link detected
Description
1000Base-TX
BI_DA+
Receive Data+
or Bi-Directional
Pair A+
BI_DA-
Receive
Data- or Bi-
Directional Pair A-
BI_DB+
Transmit Data+
or Bi-Directional
Pair B+
BI_DC+
Transmit Data+
or Bi-Directional
Pair C+
BI_DC-
Receive
Data- or Bi-
Directional Pair C-
Copper Ethernet Ports
Advertisement
Table of Contents
