Table of Contents
Advertisement
protection code error 158
protection code generator 157
protection code transmission 158
protocol 8
layer 9
lower level 7
option 8
SCSI 9
SCSI-3 standards 2
service confirmation 8
service indication 8
service request 9
service response 9
service, unconfirmed 11
upper level 11
protocol option bits 92
protocol options 45
protocol options bits 45
protocol service
confirmed 5
peer-to-peer 8
protocol service interface 5
protocol specific 6
protocol-specific 11
protocol-specific event 9
Q
QAS 15
QAS arbitration delay 29
QAS assertion delay 29
QAS non-Data phase REQ (ACK) period 29
QAS release delay 29
QAS Request message 125
QAS request message 6, 96
QAS. see quick arbitration and selection 9
QAS_REQ 46
QAS-capable initiator 29
queue 9
queue tag 9
queue tag value 149
queued task 147
quick arbitration and selection 9
R
RD_STRM 47
RDDATA. see Read Data
Read Capacity command 149
Read command 140, 141
Read Data
SPI command information unit 119, 120
receive assertion period 29
receive hold time 29
receive internal hold time 30
receive internal setup time 30
166
receive negation period 30
receive REQ (ACK) period tolerance 30
receive REQ assertion 30
receive REQ negation period 30
receive SCSI bus data and information phase DT
timing values 24
receive setup time 30
receive skew compensation 30
receiver 9
receiver amplitude time skew 31
receiver clock shifting 36
receiver signal adjustment 36
receiver skew compensation 36
recovered error sense key 149
reference model 9
relationship (nexus) 8
Release command 148
removal and insertion of SCSI device 158
REQ(ACK) period 31
REQ. see Request
REQ/ACK 6
REQ/ACK offset 44
request 9, 10
confirmation transaction 9
response transaction 9
SCSI bus signal 15
Request Sense 29
request sense 136
Request Sense command 31, 131, 144, 146
Reselection phase 31
reservation conflict 139
Reserve command 148
reserved 11
reserved bit 131
reserved byte 131
reserved code value 131
reserved fields 131
Reserved for Fiber Channel Protocol
SPI status information unit 127
Reserved for Fibre Channel Protocol
SPI status information unit 127
reset
event 9
hard 6
SCSI bus signal 15
reset delay 31
reset event 109
reset hold time 31
reset to selection 31
residual skew error 31
response 9
service 10
restore pointers message 96
rounded parameter 149
rounding of parameter values 149
Parallel SCSI Interface Product Manual, Rev. A
Advertisement
Table of Contents
