Leupold GX-1i3 Operating Instructions Manual page 28

3) The last saved altitude will be flashing in the
bottom portion of the display . If you wish to input
an altitude other than the one shown, proceed
to step 4 . To save the shown altitude press and
hold MODE for at least 2 seconds . To continue
through the Quick Set Menu and manipulate
another function, press and release MODE until the
appropriate icon is displayed .
4) Press POWER to toggle through the altitude settings . The default setting is 1,000
feet . Pressing POWER will toggle through a range of 0 feet to 9,999 feet in 500 foot
increments .
When the appropriate altitude is displayed, press and release MODE to save the selec-
tion . The process for setting up the temperature and altitude at which the striking
distances were measured is complete . To return to ranging mode, press and hold MODE
for at least 2 seconds . To continue through the Quick Set Menu and manipulate another
function, press and release MODE until the appropriate icon is displayed .
25
M
Y
in
cm
ft